编译U-boot失敗

本人用Fedora 14,编译U-boot時出現以下的ERROR,為什麼呢?


[root@localhost u-boot-mini6410]# make mini6410_nand_config-ram256;make
Configuring for mini6410 board which boot from NAND ram256...
for dir in tools examples post post/cpu ; do make -C $dir _depend ; done [upload=1] [upload=1]  
make[1]: Entering directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/tools'
make[1]: Nothing to be done for `_depend'.
make[1]: Leaving directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/tools'
make[1]: Entering directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/examples'
make[1]: Nothing to be done for `_depend'.
make[1]: Leaving directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/examples'
make[1]: Entering directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/post'
make[1]: Nothing to be done for `_depend'.
make[1]: Leaving directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/post'
make[1]: Entering directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/post/cpu'
make[1]: Nothing to be done for `_depend'.
make[1]: Leaving directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/post/cpu'
make -C tools all
make[1]: Entering directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/tools'
gcc -Wall -pedantic -idirafter /opt/FriendlyARM/mini6410/android/u-boot-mini6410/include -idirafter /opt/FriendlyARM/mini6410/android/u-boot-mini6410/include2 -idirafter /opt/FriendlyARM/mini6410/android/u-boot-mini6410/include -DTEXT_BASE=0xc7e00000 -DUSE_HOSTCC -O -c -o img2srec.o img2srec.c
make[1]: gcc: Command not found
make[1]: *** [img2srec.o] Error 127
make[1]: Leaving directory `/opt/FriendlyARM/mini6410/android/u-boot-mini6410/tools'
make: *** [tools] Error 2
[root@localhost u-boot-mini6410]#

make[1]: gcc: Command not found
gcc都没有。。。。。。

已經安裝了gcc呀,  ".bashrc" 也修改了


[root@localhost ~]# arm-linux-gcc -v
Using built-in specs.
COLLECT_GCC=arm-linux-gcc
COLLECT_LTO_WRAPPER=/opt/FriendlyARM/toolschain/4.5.1/libexec/gcc/arm-none-linux-gnueabi/4.5.1/lto-wrapper
Target: arm-none-linux-gnueabi
Configured with: /work/toolchain/build/src/gcc-4.5.1/configure --build=i686-build_pc-linux-gnu --host=i686-build_pc-linux-gnu --target=arm-none-linux-gnueabi --prefix=/opt/FriendlyARM/toolschain/4.5.1 --with-sysroot=/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/sys-root --enable-languages=c,c++ --disable-multilib --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfp --with-float=softfp --with-pkgversion=ctng-1.8.1-FA --with-bugurl=http://www.arm9.net/ --disable-sjlj-exceptions --enable-__cxa_atexit --disable-libmudflap --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-gmp=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-mpfr=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-ppl=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-cloog=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-mpc=/work/toolchain/build/arm-none-linux-gnueabi/build/static --with-libelf=/work/toolchain/build/arm-none-linux-gnueabi/build/static --enable-threads=posix --with-local-prefix=/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/sys-root --disable-nls --enable-symvers=gnu --enable-c99 --enable-long-long
Thread model: posix
gcc version 4.5.1 (ctng-1.8.1-FA)

是找不到gcc，你输个gcc试试

是呀,  command not found, 請問高人我該怎麼辦呢?

这个还用问么。。。。

引用第2楼wilsonkong88于2011-03-26 16:15发表的  :
已經安裝了gcc呀,  ".bashrc" 也修改了


[root@localhost ~]# arm-linux-gcc -v
Using built-in specs.
.......

不，是gcc，不是arm-linux-gcc，这是两种完全不同的编译器。

引用第4楼wilsonkong88于2011-03-26 16:45发表的  :
是呀,  command not found, 請問高人我該怎麼辦呢?

想装？得看您是啥Linux系统啊。ubuntu就比较好解决，fedora我就不清楚了

fedora9自带了，可能他用的F15没有带，或者没装