最近买了友善的开发板子(MLC2 2G nand),从SD启动,superboot可以正常启动到shell并可以烧录.并且可以正常启动.但是当我用进入uboot里面的shell时候,发现只能用B和Q命令.为什么uboot还不支持正常烧录?有没有哪个UBOOT版本能支持MLC2的NAND正常功能?请看下面log.
##### FriendlyARM Superboot for 6410 #####
[f] Format the nand flash
[v] Download uboot.bin
[k] Download Linux/Android kernel
[y] Download root yaffs2 image
Download root ubifs image
[a] Download Absolute User Application
[n] Download Nboot.nb0 for WinCE
[l] Download WinCE bootlogo
[w] Download WinCE NK.bin
Boot the system
[s] Set the boot parameter of Linux
[d] Download and Run an Absolute User Application
Version: 1114, RAM 256 MiB, NAND(MLC2) 2048 MiB
Enter your Selection:
Hit any key to stop autoboot: 0
##### FriendlyARM U-Boot(2011-03, NAND) for 6410 #####
[f] Format the nand flash
[v] Download u-boot.bin
[k] Download Linux/Android kernel
[y] Download root yaffs2 image
[a] Download Absolute User Application
[n] Download Nboot.nb0 for WinCE
[w] Download WinCE NK.nb0
[s] Set the boot parameter of Linux
Boot Linux
[q] Quit to shell
NAND(MLC2): 2048 MiB, RAM: 256 MiB
Enter your Selection:k
Support command B and Q yet
##### FriendlyARM U-Boot(2011-03, NAND) for 6410 #####
