Openwrt-ARM项目是由广东科贸职业学院嵌入式实验室发起的openwrt在arm开发板移植的项目。目的是在通过OpenWrt嵌入式发行版实现更简单的嵌入式linux系统构建，
开发移植，通过它更快地学习嵌入式linux系统构建，以及嵌入式linux软件开发，通过利用Openwrt的软件资源，实现各种项目的快速开发，比如远程控制智能小车（已实现），远程
监控摄像头（已实现）,机器人图像分析（制作中）等等。
整个项目遵循GPL协议，任何人都可以获取并得到源代码。
整个项目由嵌入式实验室的成员开发移植(Lintel进行内核移植，驱动开发维护；OuXin硬件测试，开发；Anylo负责应用软件开发以及维护;)
项目主页:
http://code.google.com/p/openwrt-arm/我们欢迎各大开发板厂商提供开发板以支援我们的项目。
联系方式:
lintel <
lintel77@qq.com>
OuXin <
ouxin@126.com>
Anylo <
mike777777@qq.com>
地址:广东省广州市白云区石井镇石庆路388号 广东科贸职业学院(白云校区)嵌入式实验室
Luci截图预览:
QT:
OpenCV,人脸识别:
GTK:
Boot Log:
OK
U-Boot 1.1.6 (Aug 9 2011 - 07:17:02) For OpenWrt
CPU: S3C6410@666MHz
Fclk = 666MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (ASYNC Mode)
Board: MINI6410
DRAM: 256 MB
Flash: 0 kB
NAND: 256 MB
In: serial
Out: serial
Err: serial
MAC: 08:90:90:90:90:90
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x80000, size 0x500000
........................................Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.36.4 (lintel@lintel-Aspire-4741) (gcc version 4.3.3 (GCC) ) #6 PREEMPT Sat Aug 13 18:58:55 BST 2011
[ 0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Mini6410
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] CPU S3C6410 (id 0x36410101)
[ 0.000000] s3c6410_init_clocks: initialising clocks
[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[ 0.000000] camera: no parent clock specified
[ 0.000000] s3c6400_setup_clocks: registering clocks
[ 0.000000] s3c6400_setup_clocks: clkdiv0 = 01043310
[ 0.000000] s3c6400_setup_clocks: xtal is 12000000
[ 0.000000] S3C64XX: PLL settings, A=666000000, M=532000000, E=24000000
[ 0.000000] S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
[ 0.000000] mout_apll: source is fout_apll (1), rate is 666000000
[ 0.000000] mout_epll: source is epll (1), rate is 24000000
[ 0.000000] mout_mpll: source is mpll (1), rate is 532000000
[ 0.000000] mmc_bus: source is mout_epll (0), rate is 24000000
[ 0.000000] mmc_bus: source is mout_epll (0), rate is 24000000
[ 0.000000] mmc_bus: source is mout_epll (0), rate is 24000000
[ 0.000000] usb-bus-host: source is clk_48m (0), rate is 48000000
[ 0.000000] s3c64xx_clk_doutmpll_get_rate: parent is 532000000
[ 0.000000] uclk1: source is dout_mpll (1), rate is 66500000
[ 0.000000] spi-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] spi-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] audio-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] irda-bus: source is mout_epll (0), rate is 24000000
[ 0.000000] camera: no parent clock specified
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c044602c, node_mem_map c0482000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttySAC0,115200
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 255260k/255260k available, 6884k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[ 0.000000] vmalloc : 0xd0800000 - 0xe0000000 ( 248 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc002a000 ( 136 kB)
[ 0.000000] .text : 0xc002a000 - 0xc0420000 (4056 kB)
[ 0.000000] .data : 0xc0420000 - 0xc0446640 ( 154 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:246
[ 0.000000] s3c64xx_init_irq: initialising interrupts
[ 0.000000] VIC @f4000000: id 0x00041192, vendor 0x41
[ 0.000000] VIC @f4010000: id 0x00041192, vendor 0x41
[ 0.000000] timer tcon=00580000, tcnt 1b0f0, tcfg 00000201,00010000, usec 00001719
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttySAC0] enabled
[ 0.020000] Calibrating delay loop... 665.19 BogoMIPS (lpj=3325952)
[ 0.260000] pid_max: default: 32768 minimum: 301
[ 0.260000] Mount-cache hash table entries: 512
[ 0.260000] CPU: Testing write buffer coherency: ok
[ 0.270000] NET: Registered protocol family 16
[ 0.300000] LEDs initialized.
[ 0.300000] s3c64xx_dma_init: Registering DMA channels
[ 0.300000] s3c64xx_dma_init1: registering DMA 0 (d0808100)
[ 0.310000] s3c64xx_dma_init1: registering DMA 1 (d0808120)
[ 0.310000] s3c64xx_dma_init1: registering DMA 2 (d0808140)
[ 0.320000] s3c64xx_dma_init1: registering DMA 3 (d0808160)
[ 0.330000] s3c64xx_dma_init1: registering DMA 4 (d0808180)
[ 0.330000] s3c64xx_dma_init1: registering DMA 5 (d08081a0)
[ 0.340000] s3c64xx_dma_init1: registering DMA 6 (d08081c0)
[ 0.340000] s3c64xx_dma_init1: registering DMA 7 (d08081e0)
[ 0.350000] PL080: IRQ 73, at d0808000
[ 0.350000] s3c64xx_dma_init1: registering DMA 8 (d080c100)
[ 0.360000] s3c64xx_dma_init1: registering DMA 9 (d080c120)
[ 0.360000] s3c64xx_dma_init1: registering DMA 10 (d080c140)
[ 0.370000] s3c64xx_dma_init1: registering DMA 11 (d080c160)
[ 0.370000] s3c64xx_dma_init1: registering DMA 12 (d080c180)
[ 0.380000] s3c64xx_dma_init1: registering DMA 13 (d080c1a0)
[ 0.380000] s3c64xx_dma_init1: registering DMA 14 (d080c1c0)
[ 0.390000] s3c64xx_dma_init1: registering DMA 15 (d080c1e0)
[ 0.400000] PL080: IRQ 74, at d080c000
[ 0.400000] S3C6410: Initialising architecture
[ 0.460000] bio: create slab <bio-0> at 0
[ 0.460000] SCSI subsystem initialized
[ 0.460000] usbcore: registered new interface driver usbfs
[ 0.460000] usbcore: registered new interface driver hub
[ 0.470000] usbcore: registered new device driver usb
[ 0.480000] s3c-i2c s3c2440-i2c: slave address 0x10
[ 0.480000] s3c-i2c s3c2440-i2c: bus frequency set to 64 KHz
[ 0.490000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
[ 0.490000] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.550000] NET: Registered protocol family 2
[ 0.550000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.560000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.570000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.570000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.580000] TCP reno registered
[ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] NET: Registered protocol family 1
[ 0.600000] audit: initializing netlink socket (disabled)
[ 0.600000] type=2000 audit(0.600:1): initialized
[ 0.640000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.640000] Registering mini_fo version $Id$
[ 0.650000] JFFS2 version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (RUBIN) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.660000] msgmni has been set to 498
[ 0.660000] io scheduler noop registered (default)
[ 0.670000] S3C_LCD clock got enabled :: 133.000 Mhz
[ 0.690000] LCD TYPE :: A70 will be initialized
[ 0.700000] Window[0] - FB1: map_video_memory: clear ff600000:003a9800
[ 0.720000] FB1: map_video_memory: dma=5f000000 cpu=ff600000 size=003a9800
[ 0.730000] Console: switching to colour frame buffer device 100x30
[ 0.750000] fb0: s3cfb frame buffer device
[ 0.750000] backlight initialized
[ 1.500000] gpiodev: gpio device registered with major 253
[ 1.510000] adc initialized
[ 1.510000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.520000] s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
[ 1.520000] s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
[ 1.530000] s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
[ 1.540000] s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
[ 1.550000] S3C NAND Driver, (c) 2008 Samsung Electronics
[ 1.550000] S3C NAND Driver ECC Disabled.
[ 1.560000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
[ 1.560000] NAND_ECC_NONE selected by board driver. This is not recommended !!
[ 1.570000] Creating 3 MTD partitions on "NAND 256MiB 3,3V 8-bit":
[ 1.580000] 0x000000000000-0x000000080000 : "Bootloader"
[ 1.590000] 0x000000080000-0x000000580000 : "Kernel"
[ 1.590000] 0x000000580000-0x000010000000 : "rootfs"
[ 1.670000] mtd: partition "rootfs" set to be root filesystem
[ 1.670000] mtd: partition "rootfs_data" created automatically, ofs=2140000, len=DEC0000
[ 1.680000] 0x000002140000-0x000010000000 : "rootfs_data"
[ 1.760000] dm9000 Ethernet Driver, V1.31
[ 1.880000] eth0: dm9000a at d08da000,d0c00004 IRQ 108 MAC: 08:90:90:90:90:90 (chip)
[ 1.880000] mice: PS/2 mouse device common for all mice
[ 1.890000] touchscreen-1wire initialized
[ 1.890000] backlight-1wire initialized
[ 1.890000] input: TouchScreen Pipe as /devices/virtual/input/input0
[ 1.900000] ts-if initialized
[ 1.900000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[ 1.910000] one_wire_status: 5
[ 1.910000] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[ 1.920000] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[ 1.920000] i2c /dev entries driver
[ 1.930000] Linux video capture interface: v2.00
[ 1.930000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[ 1.940000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[ 1.940000] cpuidle: using governor ladder
[ 1.950000] one_wire_status: 4
[ 1.950000] sdhci: Secure Digital Host Controller Interface driver
[ 1.960000] sdhci: Copyright(c) Pierre Ossman
[ 1.960000] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
[ 1.970000] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
[ 1.970000] s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
[ 1.980000] Registered led device: mmc0::
[ 1.980000] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[ 1.990000] one_wire_status: 3
[ 1.990000] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
[ 2.000000] s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
[ 2.000000] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
[ 2.010000] one_wire_status: 4
[ 2.010000] s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (24000000 Hz)
[ 2.020000] enter s3c64xx_setup_sdhci1_cfg_gpio
[ 2.030000] one_wire_status: 4
[ 2.030000] Registered led device: mmc1::
[ 2.030000] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[ 2.040000] Registered led device: LED1
[ 2.040000] Registered led device: LED2
[ 2.040000] Registered led device: LED3
[ 2.040000] Registered led device: LED4
[ 2.040000] specify port
[ 2.040000] snd_mpu401: probe of snd_mpu401.0 failed with error -22
[ 2.050000] usbcore: registered new interface driver snd-usb-audio
[ 2.050000] asoc: AC97 HiFi <-> s3c-ac97 mapping ok
[ 2.100000] s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004100, 3=00008080
[ 2.100000] mmc0: new high speed SD card at address 170a
[ 2.100000] mmcblk0: mmc0:170a SD02G 1.87 GiB
[ 2.110000] mmcblk0: p1
[ 2.130000] s3c6400_setup_sdhci_cfg_card: CTRL 2=c0004120, 3=80808080
[ 2.310000] ALSA device list:
[ 2.310000] #0: MINI6410 (WM9713)
[ 2.310000] TCP westwood registered
[ 2.320000] NET: Registered protocol family 17
[ 2.320000] 802.1Q VLAN Support v1.8 Ben Greear <
greearb@candelatech.com>
[ 2.330000] All bugs added by David S. Miller <
davem@redhat.com>
[ 2.340000] s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-08 04:08:08 UTC (947304488)
[ 2.350000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.350000] Freeing init memory: 136K
[ 12.500000] JFFS2 notice: (1736) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xre.
[ 12.550000] mini_fo: using base directory: /
[ 12.550000] mini_fo: using storage directory: /overlay
[ 15.650000] eth0: link down
[ 17.130000] Compat-wireless backport release: compat-wireless-2011-06-23
[ 17.130000] Backport based on wireless-testing.git master-2011-06-22
[ 17.890000] cfg80211: Calling CRDA to update world regulatory domain
[ 19.090000] cfg80211: World regulatory domain updated:
[ 19.090000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.110000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.110000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.130000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.130000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.150000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 20.940000] usbcore: registered new interface driver rt73usb
[ 21.090000] usbcore: registered new interface driver rtl8187
[ 21.240000] usbcore: registered new interface driver rt2800usb
[ 22.100000] loop: module loaded
[ 22.320000] PPP generic driver version 2.4.2
[ 22.620000] soundcore: exports duplicate symbol unregister_sound_dsp (owned by kernel)
[ 22.700000] snd: exports duplicate symbol snd_add_device_sysfs_file (owned by kernel)
[ 22.920000] snd_page_alloc: exports duplicate symbol snd_free_pages (owned by kernel)
[ 23.060000] snd_hwdep: exports duplicate symbol snd_hwdep_new (owned by kernel)
[ 23.290000] snd_rawmidi: exports duplicate symbol snd_rawmidi_kernel_write (owned by kernel)
[ 23.340000] snd_timer: exports duplicate symbol snd_timer_interrupt (owned by kernel)
[ 23.400000] snd_pcm: exports duplicate symbol snd_pcm_notify (owned by kernel)
[ 23.460000] snd_mixer_oss: exports duplicate symbol snd_mixer_oss_ioctl_card (owned by kernel)
[ 24.500000] NET: Registered protocol family 24
[ 24.760000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.760000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
[ 24.760000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
[ 24.780000] s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
[ 24.840000] hub 1-0:1.0: USB hub found
[ 24.840000] hub 1-0:1.0: 2 ports detected
[ 25.090000] usbcore: registered new interface driver usblp
[ 25.180000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2
[ 25.320000] Initializing USB Mass Storage driver...
[ 25.320000] usbcore: registered new interface driver usb-storage
[ 25.320000] USB Mass Storage support registered.
[ 25.360000] hub 1-1:1.0: USB hub found
[ 25.360000] hub 1-1:1.0: 4 ports detected
[ 25.670000] usb 1-1.1: new full speed USB device using s3c2410-ohci and address 3
[ 25.720000] usbcore: registered new interface driver hiddev
[ 25.720000] usbcore: registered new interface driver usbhid
[ 25.740000] usbhid: USB HID core driver
[ 25.800000] hub 1-1.1:1.0: USB hub found
[ 25.800000] hub 1-1.1:1.0: 4 ports detected
[ 25.900000] usb 1-1.3: new full speed USB device using s3c2410-ohci and address 4
[ 26.040000] gspca: main v2.10.0 registered
[ 26.090000] usbcore: registered new interface driver sn9c20x
[ 26.090000] sn9c20x: registered
[ 26.130000] usb 1-1.3: reset full speed USB device using s3c2410-ohci and address 4
[ 26.190000] usbcore: registered new interface driver sunplus
[ 26.190000] sunplus: registered
[ 26.300000] usbcore: registered new interface driver t613
[ 26.300000] t613: registered
[ 26.380000] usbcore: registered new interface driver zc3xx
[ 26.380000] zc3xx: registered
[ 26.520000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 26.540000] Registered led device: rt2800usb-phy0::radio
[ 26.540000] Registered led device: rt2800usb-phy0::assoc
[ 26.540000] Registered led device: rt2800usb-phy0::quality
[ 26.550000] usbcore: registered new interface driver uvcvideo
[ 26.550000] USB Video Class driver (v0.1.0)
[ 26.600000] usbip_common_mod: usbip common driver1.0
[ 26.640000] usb 1-1.1.3: new low speed USB device using s3c2410-ohci and address 5
[ 26.770000] input: 2.4GHz 2way RF Receiver as /devices/platform/s3c2410-ohci/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/input/input1
[ 26.790000] generic-usb 0003:1BCF:05CA.0001: input,hidraw0: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-s3c24xx-1.1.3/input0
[ 26.870000] input: 2.4GHz 2way RF Receiver as /devices/platform/s3c2410-ohci/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/input/input2
[ 26.870000] generic-usb 0003:1BCF:05CA.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-s3c24xx-1.1.3/input1
[ 26.980000] usb 1-1.1.4: new low speed USB device using s3c2410-ohci and address 6
[ 27.120000] input: GASIA USB KB V11 as /devices/platform/s3c2410-ohci/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input3
[ 27.140000] generic-usb 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-s3c24xx-1.1.4/input0
[ 27.180000] input: GASIA USB KB V11 as /devices/platform/s3c2410-ohci/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input4
[ 27.200000] generic-usb 0003:0E8F:0022.0004: input,hidraw3: USB HID v1.10 Device [GASIA USB KB V11] on usb-s3c24xx-1.1.4/input1
[ 27.200000] usbcore: registered new interface driver usbip
[ 27.210000] usbip:Stub Driver for USB/IP:1.0
[ 41.820000] s3c2410-wdt s3c2410-wdt: timeout 60 too big
BusyBox v1.15.3 (2011-08-13 11:10:01 BST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
Backfire (10.03.1-RC6, r19) --------------------
* 1/3 shot Kahlua In a shot glass, layer Kahlua
* 1/3 shot Bailey's on the bottom, then Bailey's,
* 1/3 shot Vodka then Vodka.
---------------------------------------------------
root@OpenWrt:/#
root@OpenWrt:/# cat /proc/cpuinfo
Processor : ARMv6-compatible processor rev 6 (v6l)
BogoMIPS : 665.19
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xb76
CPU revision : 6
Hardware : Mini6410
Revision : 0000
Serial : 0000000000000000
root@OpenWrt:/# lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 004: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter
Bus 001 Device 005: ID 1bcf:05ca Sunplus Innovation Technology Inc.
Bus 001 Device 006: ID 0e8f:0022 GreenAsia Inc.
root@OpenWrt:/# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 27.8M 27.8M 0 100% /rom
tmpfs 124.7M 48.0K 124.7M 0% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 222.8M 5.0M 217.7M 2% /overlay
mini_fo:/overlay 27.8M 27.8M 0 100% /
root@OpenWrt:/# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime,size=127700k)
tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,relatime)
mini_fo:/overlay on / type mini_fo (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
/dev/mmcblk0p1 on /mnt/mmcblk0p1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
下载地址:
http://openwrt-arm.googlecode.com/files/openwrt-s3c64xx-mini6410-bin.tar.gzhttp://openwrt-arm.googlecode.com/files/openwrt-mini6410-jffs2-64k.bin.tar.gz更新方式：
1.通过superboot更新u-boot，在压缩包里面。
2.通过依次通过usb下载内核，rootfs。根据自己的需要下载。其中A70是给7寸屏的，N43是给4.3寸屏的。
3.boot，等待jffs2文件系统构建完成即可使用。
[ 此帖被lintel在2011-08-27 13:29重新编辑 ]
