我的也有同样的问题
你是要串口输出信息吗
usbcore: registered new interface driver spca1528
usbcore: registered new interface driver sq905
usbcore: registered new interface driver sq905c
usbcore: registered new interface driver sq930x
usbcore: registered new interface driver sunplus
one_wire_status: 5
usbcore: registered new interface driver stk014
usbcore: registered new interface driver stv0680
usbcore: registered new interface driver t613
usbcore: registered new interface driver tv8532
usbcore: registered new interface driver vc032x
usbcore: registered new interface driver xirlink-cit
usbcore: registered new interface driver zc3xx
usbcore: registered new interface driver ALi m5602
one_wire_status: 5
usbcore: registered new interface driver STV06xx
gspca_gl860: driver startup - version 0.9d10
usbcore: registered new interface driver gspca_gl860
usbcore: registered new interface driver hdpvr
usbcore: registered new interface driver s2255
s3c-fimc: controller 0 registered successfully
s3c-fimc: controller 1 registered successfully
FIMC Driver, 2010 ported by FriendlyARM
http://www.arm9.netov965x: probe
s3c-fimc: i2c transfer error
s3c-fimc: i2c transfer error
s3c-fimc: i2c transfer error
s3c-fimc: i2c transfer error
s3c-fimc: ov965x: Product ID fb:fb Manufacturer ID fb:fb
parent clock for camera: 266.000 MHz, divisor: 11
[CAM]RESET CAM.
one_wire_status: 4
S3C6400 MFC Driver, (c) 2007 Samsung Electronics, 2010 ported by FriendlyARM
http://www.arm9.net S3C6400 MFC Driver init OK.
S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
S3C6410 TV encoder Driver, (c) 2008 Samsung Electronics
S3C6410 TV encoder Driver init OK.
S3C6410 TV scaler Driver, (c) 2008 Samsung Electronics
S3C6410 TV scaler Driver init OK.
S3C Rotator Driver, (c) 2008 Samsung Electronics
s3c_rotator_probe called
s3c_rotator_probe success
one_wire_status: 5
S3C JPEG Driver, (c) 2007 Samsung Electronics
s3c_g2d_probe called
s3c_g2d_probe Success
S3C G2D Init : Done
S3C G3D Driver, (c) 2007-2009 Samsung Electronics
s3c_g3d version : 0x1050000
S3C G3D Init : Done
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
one_wire_status: 4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (84666666 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
one_wire_status: 4
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (84666666 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 SD 7.36 GiB
mmcblk0: p1
asoc: wm9713-hifi <-> samsung-ac97 mapping ok
ALSA device list:
#0: MINI6410
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-29 01:56:19 UTC (949110979)
Freeing init memory: 1408K
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "FriendlyARM-root"
UBIFS: file system size: 2062319616 bytes (2013984 KiB, 1966 MiB, 1998 LEBs)
UBIFS: journal size: 12517376 bytes (12224 KiB, 11 MiB, 13 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
one_wire_status: 2
UBIFS: reserved for root: 0 bytes (0 KiB)
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
fa_cpu_pfn: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
FriendlyARM proprietary driver for mini6410 initialized.
[28/Jan/2000:17:56:25 +0000] boa: server version Boa/0.94.13
[28/Jan/2000:17:56:25 +0000] boa: server built Dec 30 2010 at 11:18:35.
[28/Jan/2000:17:56:25 +0000] boa: starting server pid=958, port 80
Try to bring eth0 interface up......eth0: link down
Done
Please press Enter to activate this console. eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
ini文件为自带的文件
#This line cannot be removed. by FriendlyARM(
www.arm9.net)
LCD-Mode = Yes
LCD-Type = N43
CheckOneButton=No
Action=install
OS= Linux
VerifyNandWrite=No
StatusType = Beeper| LED
#################### Linux #####################
Linux-BootLoader = superboot-6410.bin
Linux-Kernel = Linux/zImage_n43
Linux-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
Linux-RootFs-InstallImage = Linux/rootfs_qtopia_qt4-mlc2.ubi
Linux-RootFs-RunImage = Linux/rootfs_qtopia_qt4.ext3
################### Android ####################
Android-BootLoader = superboot-6410.bin
Android-Kernel = Android/azImage_n43
Android-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200 androidboot.console=s3c2410_serial0
Android-RootFs-InstallImage = Android/rootfs_android-mlc2.ubi
Android-RootFs-RunImage = Android/rootfs_android.ext3
################### WindowsCE6 #################
WindowsCE6-Bootloader= superboot-6410.bin
WindowsCE6-BootLogo = WindowsCE6\bootlogo.bmp
WindowsCE6-InstallImage = WindowsCE6\NK_n43-i.bin
WindowsCE6-RunImage = WindowsCE6\NK_n43-i.bin
#################### Ubuntu #####################
Ubuntu-BootLoader = superboot-6410.bin
Ubuntu-Kernel = Ubuntu/uzImage_n43
Ubuntu-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs init=/linuxrc console=ttySAC0,115200
Ubuntu-RootFs-InstallImage = Ubuntu/rootfs_ubuntu-mlc2.ubi
Ubuntu-RootFs-RunImage = Ubuntu/rootfs_ubuntu.ext3
############### UserBin #################
UserBin-Image=WindowsCE/NK_n43-i.nb0
userBin-StartAddress=50100000
