主题 : 编译2.6.18 内核下载后为什么不能启动? 复制链接 | 浏览器收藏 | 打印
级别: 侠客
UID: 172
精华: 1
发帖: 48
金钱: 500 两
威望: 68 点
贡献值: 10 点
综合积分: 116 分
注册时间: 2008-02-27
最后登录: 2017-09-13
40楼  发表于: 2008-04-09 16:14
boot option 配置为
noitrd root=31:2 rw init=/linuxrc console=ttySAC0

错误如下:



##### FriendlyARM BIOS for 2440 #####                                   
[x] bon part 0 320k 2368k                       
[v] Download vivi               
[k] Download linux kernel                       
[y] Download root_yaffs image                           
[c] Download root_cramfs image                             
[n] Download Nboot                 
[e] Download Eboot                 
Download WinCE NK.nb0                       
[w] Download WinCE NK.bin                       
[d] Download & Run                 
[f] Format the nand flash                       
[p] Partition for Linux                     
Boot the system                 
[s] Set the boot parameters                         
[t] Print the TOC struct of wince                               
[q] Goto shell of vivi                     
Enter your selection: B                     

##### FriendlyARM BIOS for 2440 #####                                   
[x] bon part 0 320k 2368                     
[v] Download vivi               
[k] Download linux kernel                       
[y] Download root_yaffs image                           
[c] Download root_cramfs image                             
[n] Download Nboot                 
[e] Download Eboot                 
Download WinCE NK.nb0                       
[w] Download WinCE NK.bin                       
[d] Download & Run                 
[f] Format the nand flash                       
[p] Partition for Linux                     
Boot the system                 
[s] Set the boot parameters                         
[t] Print the TOC struct of wince                               
[q] Goto shell of vivi                     
Enter your selection: b                     
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... done                                                                         
zImage magic = 0x016f2818                       
Setup linux parameters at                         
linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA                                                                               
C0" 
MACH_TYPE = 362             
NOW, Booting Linux......                       
Uncompressing Linux.............................................................                                                                               
.............................. done, booting the kernel.                                                       
<5>Linux version 2.6.18 (root@localhost.localdomain) (gcc version 3.4.1) #9 Wed                                                                             
Apr 9 16:03:20 CST 2008                     
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177                                                       
Machine: SMDK2440               
<7>Converting old-style param struct to taglist                                             
<4>ATAG_INITRD is deprecated; please update your bootloader.                                                           
Memory policy: ECC disabled, Data cache writeback                                               
<7>On node 0 totalpages: 16384                             
<7>  DMA zone: 16384 pages, LIFO batch:3                                       
CPU S3C2440A (id 0x32440001)                           
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz                                                                   
<6>S3C24XX Clocks, (c) 2004 Simtec Electronics                                             
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on                                                   
CPU0: D VIVT write-back cache                           
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
CPU0: D cache: 16384 bytes, associativ                                   
Built 1 zonelists.  Total pages: 16384                                     
<5>Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA                                                                               
C0 
irq: clearing pending ext status 00000200                                       
irq: clearing subpending status 00000003                                       
irq: clearing subpending status 00000002                                       
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
timer tcon=00000000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57                                                                   
Console: colour dummy device 80x30                                 
<7>selected clock c0286870 (pclk) quot 26, calc 117187                                                     
Linux version 2.6.18 (root@localhost.localdomain) (gcc vers                                                         
9 16:03:20 CST 2008                   
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177                                                       
Machine: SMDK2440               
ATAG_INITRD is deprecated; please update your bootloader.                                                       
Memory policy: ECC disabled, Data cache writeback                                               
CPU S3C2440A (id 0x32440001)                           
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz                                                                   
S3C24XX Clocks, (c) 2004 Simtec Electronics                                         
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on                                                   
CPU0: D VIVT write-back cache                           
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
Built 1 zonelists.  Total pages: 16384                                     
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0                                                                             
irq: clearing pending ext status 00000200                                       
irq: clearing subpending status 00000003                                       
irq: clearing subpending status 00000002                                       
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
timer tcon=00000000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57                                                                   
DDentry cache hash table entries: 8192 (order: 3, 32768 bytes)                                                             
entry cache hash table entries: 8192 (order: 3, 32768 bytes)                                                           
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                                           
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                                           
Memory:<6>Memory: 64MB 64MB = 64MB total                                       
= 64MB total           
Memory: 61872KB available (2357K code, 505K data, 108K init)                                                           
<5>Memory: 61872KB available (2357K code, 505K data, 108K init)                                                             
<7>Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)                                                       
Mount-cache hash table entries: 512                                 
Mount-cache hash table entries: 512                                 
CPU: Testing write buffer coherency: <6>CPU: Testing write buffer coherency: ok                                                                             
ok 
NET: Registered protocol family 16                                 
<6>NET: Registered protocol family 16                                   
S3C2410 Power Management, (c) 2004 Simtec Electronics                                                   
S3C2410 Power Management, (c) 2004 Simtec Electronics                                                   
S3C2440: Initialising architecture                                 
S3C2440: Initialising architecture                                 
S3C2440: IRQ Support                   
S3C2440: IRQ Support                   
S3C2440: Clock Support, DVS off                             
S3C2440: Clock Support, DVS off                             
usbcore: registered new driver usbfs                                   
<6>usbcore: registered new driver usbfs                                     
usbcore: registered new driver hub                                 
<6>usbcore: registered new driver hub                                   
NET: Registered protocol family 2                               
<6>NET: Registered protocol family 2                                   
IP route cache hash table entries: 512 (order: -1, 2048 bytes)                                                             
IP route cache hash table entries: 512 (order: -1, 2048 bytes)                                                             
TTP established hash table entries: 2048 (order: 1, 8192 bytes)                                                             
CP established hash table entries: 2048 (order: 1, 8192 bytes)                                                             
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                                                       
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                                                       
TCP: Hash tables configured (established 2048 bind 1024)                                                       
<6>TCP: Hash tables configured (established 2048 bind 1024)                                                         
TCP reno registered                 
<6>TCP reno registered                     
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics                                                   
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics                                                   
DMA channel 0 at c4800000, irq 33                               
DMA channel 0 at c4800000, irq 33                               
DMA channel 1 at c4800040, irq 34                               
DMA channel 1 at c4800040, irq 34                               
DMA channel 2 at c4800080, irq 35                               
DMA channel 2 at c4800080, irq 35                               
DMA channel 3 at c48000c0, irq 36                               
DMA channel 3 at c48000c0, irq 36                               
NetWinder Floating Point Emulator V0.97 (double precision)                                                         
<4>NetWinder Floating Point Emulator V0.97 (double precision)                                                           
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB                                                       
<6>JFFS version 1.0, (C) 1999, 2000  Axis Communications AB                                                         
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                                   
<6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                                       
io scheduler noop registered<6>io scheduler noop registered                                                         

io scheduler anticipatory registered<6>io scheduler anticipatory register                                                                     
ault) (default)             

io scheduler deadline registered<6>io scheduler deadline registered                                                                 

io scheduler cfq registered<6>io scheduler cfq registered                                                       

Console: switching to colour frame buffer device 30x40                                                     
Console: switching to colour frame buffer device 30x40                                                     
fb0: s3c2410fb frame buffer device                                 
<6>fb0: s3c2410fb frame buffer device                                   
lp: driver loaded but no devices found                                     
<6>lp: driver loaded but no devices found                                       
S3C2410 RTC, (c) 2004 Simtec Electronics                                       
S3C2410 RTC, (c) 2004 Simtec Electronics                                       
ppdev: user-space parallel p                         
<6>ppdev: user-space parallel port driver                                       
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics                                                 
<6>S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics                                                     
Serial: 82<0/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled                                                                       
6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled                                                                         
s3c2440-uart<0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440                                                                         
6>s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440                                                                           
s3c2440-uart<1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a                                                                 
6>s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440                                                                           
s3c2440-uart<2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440                                                                         
6>s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440                                                                           
RAMDISKRdriver initialized: 16 RAM disks of 4096K size 1024 blocksize                                                                   
AMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize                                                                   
loop: loaded (max 8 devices)                           
<6>loop: loaded (max 8 devices)                             
dm9000 Ethernet Driver                     
<6>dm9000 Ethernet Driver                       
Uniform Multi-Platform E-IDE driver Rev                                   
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2                                                         
ide: Assuming<50MHz system bus speed for PIO modes; override with idebus=xx                                                                         
6>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx                                                                           
S3C24XX NAND Driver, (c) 2004 Simtec Electronics                                               
S3C24XX NAND Driver, (c) 2004 Simtec Electronics                                               
<7>s3c2410_nand_probe(c0279324)                             
<7>s3c2440-nand s3c2440-nand: mapped registers at c4c00000                                                         
<7>result 3 from 101250, 20                         
<7>result 7 from 101250, 60                         
<7>result 3 from 101250, 20                         
s3c2440<nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns                                                                   
6>s3c2440-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns                                                                     
<7>s3c2440-nand s3c2440-nand: NF_CONF is 0x2620                                             
<7>initialising set 0 (c3d4e000, info c3d343e0)                                             
NAND device: Manufa<turer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit                                                                               
)
6>NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-b                                                                               
it) 
Scanning device for bad blocks                             
<6>Scanning device for bad blocks                               
Creating 8 MTD partitions on "NAND 64MiB 3,3V                                             
<5>Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit":                                                       
0x00000000-0x00004000 : "Boot Agent"                                   
<5>0x00000000-0x00004000 : "Boot Agent"                                     
0x00000000-0x00200000 : "S3C2410 flash partition 1"                                                 
<5>0x00000000-0x00200000 : "S3C2410 flash partition 1"                                                     
0x00400000-0x00800000 : "S3C2410 flash partition 2"                                                 
<5>0x00400000-0x00800000 : "S3C2410 flash partition 2"                                                     
0x00800000-0x00a00000 : "S3C2410 flash partition 3"                                                 
<5>0x00800000-0x00a00000 : "S3C2410 flash partition 3"                                                     
0x00a00000-0x00e00000 : "S3C2410 flash partition 4"                                                 
<5>0x00a00000-0x00e00000 : "S3C2410 flash partition 4"                                                     
0x00e00000-0x01800000 : "S3C2410 flash partition 5"                                                 
<5>0x00e00000-0x01800000 : "S3C2410 flash partition 5"                                                     
0x01800000-0x03000000 : "S3C2410 flash partition 6"                                                 
<5>0x01800000-0x03000000 : "S3C2410 flash partition 6"                                                     
0x03000000-0x04000000 : "S3C2410 flash partition 7"                                                 
<5>0x03000000-0x04000000 : "S3C2410 flash partition 7"                                                     
<7>initialised ok               
usbmon: debugfs is not available                               
<5>usbmon: debugfs is not available                                 
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI                                     
<6>s3c2410-ohci s3c2410-ohci: S3C24XX OHCI                                         
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                       
<6>s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                         
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000                                                   
<6>s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000                                                     
usb usb1: configuration #1 chosen from 1 choice                                             
<6>usb usb1: configuration #1 chosen from 1 choice                                                 
hub 1-0:1.0: USB hub found                         
<6>hub 1-0:1.0: USB hub found                           
hub 1-0:1.0: 2 ports detected                           
<6>hub 1-0:1.0: 2 ports detect                           
mice: PS/2 mouse device common for all mice                                         
<6>mice: PS/2 mouse device common for all mice                                             
s3c2440-i2c s3c2440-i2c: slave address 0x10                                         
<6>s3c2440-i2c s3c2440-i2c: slave address 0x10                                             
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz                                                   
<6>s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz                                                     
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter                                             
<6>s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter                             
TCP bic registered
<6>TCP bic registered
NET: Registered protocol family 1
<6>NET: Registered protocol family 1
end_request: I/O error, dev mtdblock2, sector 2
end_request: I/O error, dev mtdblock2, sector 2
EXT3-fs: unable to read superblock
<3>EXT3-fs: unable to read superblock
end_request: I/O error, dev mtdblock2, sector 2
end_request: I/O error, dev mtdblock2, sector 2
EXT2-fs: unable to read superblock
EXT2-fs: unable to read superblock
end_request: I/O error, dev mtdblock2, sector 0
end_request: I/O error, dev mtdblock2, sector 0
FAT: unable to read boot sector
<3>FAT: unable to read boot sector
VVS: Cannot open root device "mtdblock2" or unknown-block(31,2)
FS: Cannot open root device "mtdblock2" or unknown-block(31,2)
Please append a correct "root=" boot option
Please append a correct "root=" boot option
Kernel panic - no< syncing: VFS: Unable to mount root fs on unknown-block(31,2)
0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2
)
级别: 侠客
UID: 172
精华: 1
发帖: 48
金钱: 500 两
威望: 68 点
贡献值: 10 点
综合积分: 116 分
注册时间: 2008-02-27
最后登录: 2017-09-13
41楼  发表于: 2008-04-09 16:15
config文件:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Wed Apr  9 15:42:15 2008
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set

#
# S3C24XX Implementations
#
# CONFIG_MACH_ANUBIS is not set
# CONFIG_MACH_OSIRIS is not set
# CONFIG_ARCH_BAST is not set
# CONFIG_ARCH_H1940 is not set
# CONFIG_MACH_N30 is not set
CONFIG_MACH_SMDK=y
# CONFIG_ARCH_SMDK2410 is not set
CONFIG_ARCH_S3C2440=y
CONFIG_SMDK2440_CPU2440=y
# CONFIG_SMDK2440_CPU2442 is not set
# CONFIG_MACH_SMDK2413 is not set
# CONFIG_MACH_VR1000 is not set
# CONFIG_MACH_RX3715 is not set
# CONFIG_MACH_OTOM is not set
# CONFIG_MACH_NEXCODER_2440 is not set
CONFIG_S3C2410_CLOCK=y
CONFIG_CPU_S3C244X=y
CONFIG_CPU_S3C2440=y

#
# S3C2410 Boot
#
# CONFIG_S3C2410_BOOT_WATCHDOG is not set
# CONFIG_S3C2410_BOOT_ERROR_RESET is not set

#
# S3C2410 Setup
#
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
CONFIG_S3C2410_LOWLEVEL_UART_PORT=0

#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y

#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set

#
# Bus support
#

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# Kernel Features
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y

#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock/3 init=/linuxrc console=ttySAC0"
# CONFIG_XIP_KERNEL is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
CONFIG_MTD_NAND_S3C2410_DEBUG=y
# CONFIG_MTD_NAND_S3C2410_HWECC is not set
# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set

#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# I2O device support
#

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#

#
# Ethernet (10000 Mbit)
#

#
# Token Ring devices
#

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2410_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_S3C2410_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
CONFIG_I2C_ISA=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=y
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_S3C2410=y
# CONFIG_FB_S3C2410_DEBUG is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set

#
# File systems
#
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVFS_DEBUG=y
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_YAFFS1=y
# CONFIG_YAFFS_9BYTE_TAGS is not set
# CONFIG_YAFFS_DOES_ECC is not set
CONFIG_YAFFS_YAFFS2=y
# CONFIG_YAFFS_AUTO_YAFFS2 is not set
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
# CONFIG_YAFFS_SHORT_NAMES_IN_RAM is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
CONFIG_DEBUG_S3C2410_PORT=y
CONFIG_DEBUG_S3C2410_UART=0

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
42楼  发表于: 2008-04-09 23:59
从这个log看,你觉得内核启动问题出在哪里?
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."
级别: 侠客
UID: 172
精华: 1
发帖: 48
金钱: 500 两
威望: 68 点
贡献值: 10 点
综合积分: 116 分
注册时间: 2008-02-27
最后登录: 2017-09-13
43楼  发表于: 2008-04-10 02:29
是否是EXT3-fs: unable to read superblock? 还请版主解释下
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
44楼  发表于: 2008-04-10 07:18
引用第43楼alexchen于2008-04-10 02:29发表的  :
是否是EXT3-fs: unable to read superblock? 还请版主解释下


EXT3-fs: unable to read superblock是现象,原因在于前面的end_request: I/O error, dev mtdblock2, sector 2
也就是说,内核无法读取mtdblock2设备(即NAND Flash的第3个分区)。如果要找出NAND Flash无法读取的原因,建议你在编译内核时打开MTD相关的DEBUG选项
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."
级别: 侠客
UID: 172
精华: 1
发帖: 48
金钱: 500 两
威望: 68 点
贡献值: 10 点
综合积分: 116 分
注册时间: 2008-02-27
最后登录: 2017-09-13
45楼  发表于: 2008-04-10 12:17
加入MTD debug 后



##### FriendlyARM BIOS for 2440 #####                                   
[x] bon part 0 320k 2368k                       
[v] Download vivi               
[k] Download linux kernel                       
[y] Download root_yaffs image                           
[c] Download root_cramfs image                             
[n] Download Nboot                 
[e] Download Eboot                 
Download WinCE NK.nb0                       
[w] Download WinCE NK.bin                       
[d] Download & Run                 
[f] Format the nand flash                       
[p] Partition for Linux                     
Boot the system                 
[s] Set the boot parameters                         
[t] Print the TOC struct of wince                               
[q] Goto shell of vivi                     
Enter your selection: k                     
USB host is not connected yet.                             
USB host is connected. Waiting a                               

Now, Downloading [ADDRESS:30000000h,TOTAL:1404810]                                                 
RECEIVED FILE SIZE: 1404810 (685KB/S, 2S)                                       
Downloaded file at 0x30000000, size = 1404800 bytes                                                 
Found block size = 0x00158000                           
Erasing...    ... done                     
Writing...    ... done                     
Written 1404800 bytes                   

##### FriendlyARM BIOS for 2440 #####                                   
[x] bon part 0 320k 2368k                       
[v] Download vivi               
[k] Download linux kernel                       
[y] Download root_yaffs image                           
[c] Download root_cramfs image                             
[n] Download Nboot                 
[e] Download Eboot                 
Download WinCE NK.nb0                       
[w] Download WinCE NK.bin                       
[d] Download & Run               
[f] Format the nand flash                       
[p] Partition for Linux                     
Boot the system                 
[s] Set the boot parameters                         
[t] Print the TOC struct of wince                               
[q] Goto shell of vivi                     
Enter your selection: b                     
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... done                                                                         
zImage magic = 0x016f2818                       
Setup linux parameters at 0x30000100                                   
linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA                                                                               
C0" 
MACH_TYPE = 362             
NOW, Booting Linux......                       
Uncompressing Linux........................................................                                                                         
.............................. done, booting the kernel.                                                       
<5>Linux version 2.6.18 (root@localhost.localdomain) (gcc version 3.4.1) #10 Thu                                                                               
Apr 10 12:01:04 CST 2008                       
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177                                                       
Machine: SMDK2440               
<7>Converting old-style param struct to taglist                                             
<4>ATAG_INITRD is deprecated; please update your bootloader.                                                           
Memory policy: ECC disabled, Data cache writeback                                               
<7>On node 0 totalpages: 16384                             
<7>  DMA zone: 16384 pages, LIFO batch:3                                       
CPU S3C2440A (id 0x32440001)                           
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz                                                                   
<6>S3C24XX Clocks, (c) 2004 Simtec Electronics                                             
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on                                                   
CPU0: D VIVT write-back cache                           
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
Built 1 zonelists.  Total pages: 16384                                     
<5>Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA                                                                               
C0 
irq: clearing pending ext status 00000200                                       
irq: clearing subpending status 00000003                                       
irq: clearing subpending status 00000002                                       
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
timer tcon=00000000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57                                                                   
Console: colour dummy device 80x30                                 
<7>selected clock c0286870 (pclk) quot 26, calc 117187                                                     
Linux version 2.6.18 (root@localhost.localdomain) (gcc version 3.4.1) #10 Thu Ap                                                                               
r 10 12:01:04 CST 2008                     
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177                                                       
Machine: SMDK2440               
ATAG_INITRD is deprecated; please update your                                           
Memory policy: ECC disabled, Data cache writeback                                               
CPU S3C2440A (id 0x32440001)                           
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz                                                                   
S3C24XX Clocks, (c) 2004 Simtec Electronics                                         
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on                                                   
CPU0: D VIVT write-back cache                           
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
Built 1 zonelists.  Total pages: 16384                                     
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc con                                                               
irq: clearing pending ext status 00000200                                       
irq: clearing subpending status 00000003                                       
irq: clearing subpending status 00000002                                       
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
timer tcon=00000000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57                                                                   
DDentry cache hash table entries: 8192 (order: 3, 32768 bytes)                                                             
entry cache hash table entries: 8192 (order: 3, 32768 bytes)                                                           
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                                           
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                                           
Memory:<6>Memory: 64MB 64M                       
= 64MB total           
Memory: 61872KB available (2361K code, 505K data, 108K init)                                                           
<5>Memory: 61872KB available (2361K code, 505K data, 108K init)                                                             
<7>Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)                                                       
Mount-cache hash table entries: 512                                 
Mount-cache hash table entries: 512                                 
CPU: Testing write buffer coherency: <6>CPU: Testing write buffer coherency: ok                                                                             
ok 
NET: Registered protocol family 16                                 
<6>NET: Registered protocol family 16                                   
S3C2410 Power Management, (c) 2004 Simtec Electronics                                                   
S3C2410 Power Management, (c) 2004 Simt                                   
S3C2440: Initialising architecture                                 
S3C2440: Initialising architecture                                 
S3C2440: IRQ Support                   
S3C2440: IRQ Support                   
S3C2440: Clock Support, DVS off                             
S3C2440: Clock Support, DVS off                             
usbcore: registered new driver usbfs                                   
<6>usbcore: registered new driver usbfs                                     
usbcore: registered new driver hub                                 
<6>usbcore: registered new driver hub                                   
NET: Registered protocol family 2                               
<6>NET: Registered protocol family 2                                   
IP route cache hash table entries: 512 (order: -1, 2048 bytes)                                                             
IP route cache hash table entries: 512 (order: -1, 2048 byt                                                       
TTP established hash table entries: 2048 (order: 1, 8192 bytes)                                                             
CP established hash table entries: 2048 (order: 1, 8192 bytes)                                                             
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                                                       
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                                                       
TCP: Hash tables configured (established 2048 bind 1024)                                                       
<6>TCP: Hash tables configured (established 2048 bind 1024)                                                         
TCP reno registered                 
<6>TCP reno registered                     
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics                                                   
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics                                                   
DMA channel 0 at c4800000, irq 33                               
DMA channel 0 at c4800000, irq 33                               
DMA channel 1 at c4800040, irq 34                               
DMA channel 1 at c4800040, irq 34                               
DMA channel 2 at c4800080, irq 35                               
DMA channel 2 at c4800080, irq 35                               
DMA channel 3 at c48000c0, irq 36                               
DMA channel 3 at c48000c0, irq 36                               
NetWinder Floating Point Emulator V0.97 (double precision)                                                         
<4>NetWinder Floating Point Emulator V0.97 (double precision)                                                           
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB                                                       
<6>JFFS version 1.0, (C) 1999, 2000  Axis Communications AB                                                         
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                                   
<6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                                       
io scheduler noop registered<6>io scheduler noop registered                                                         

io scheduler anticipatory registered<6>io scheduler anticipatory registered (def                                                                               
ault) (default)             

io scheduler deadline registered<6>io scheduler deadline registered                                                                 

io scheduler cfq registered<6>io scheduler cfq registered                                                       

Console: switching to colour frame buffer device 30x40                                                     
Console: switching to colour frame buffer device 30x40                                                     
fb0: s3c2410fb frame buffer device                                 
<6>fb0: s3c2410fb frame buffer device                                   
lp: driver loaded but no devices found                                     
<6>lp: driver loaded but no devices found                                       
S3C2410 RTC, (c) 2004 Simtec Electronics                                       
S3C2410 RTC, (c) 2004 Simtec Electronics                                       
ppdev: user-space parallel port driver                                     
<6>ppdev: user-space parallel port driver                                       
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics                                                 
<6>S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics                                                     
Serial: 82<0/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled                                                                       
6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled                                                                         
s3c2440-uart<0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440                                                                         
6>s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440                                                                           
s3c2440-uart<1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440                                                                         
6>s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440                                                                           
s3c2440-uart<2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440                                                                         
6>s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 7                                                           
RAMDISKRdriver initialized: 16 RAM disks of 4096K size 1024 blocksize                                                                   
AMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize                                                                   
loop: loaded (max 8 devices)                           
<6>loop: loaded (max 8 devices)                             
dm9000 Ethernet Driver                     
<6>dm9000 Ethernet Driver                       
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2                                                       
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2                                                         
ide: Assuming<50MHz system bus speed for PIO modes; override with idebus=xx                                                                         
6>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=                                                                       
S3C24XX NAND Driver, (c) 2004 Simtec Electronics                                               
S3C24XX NAND Driver, (c) 2004 Simtec Electronics                                               
<7>s3c2410_nand_probe(c0279324)                             
<7>s3c2440-nand s3c2440-nand: mapped registers at c4c00000                                                         
<7>result 3 from 101250, 20                         
<7>result 7 from 101250, 60                         
<7>result 3 from 101250, 20                         
s3c2440<nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns                                                                   
6>s3c2440-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns                                                                     
<7>s3c2440-nand s3c2440-nand: NF_CONF is 0x2620                                             
<7>initialising set 0 (c3d4c000, info c03fe3e0)                                             
NAND device: Manufa<turer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit                                                                               
)
6>NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-b                                                                               
it) 
Scanning device for bad blocks                             
<6>Scanning device for bad blocks                               
Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit":                                                   
<5>Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit":                                                       
0x00000000-0x00004000 : "Boot Agent"                                   
<5>0x00000000-0x00004000 : "Boot Agent"                                     
mtd: Giving out device 0 to Boot Agent                                     
<6>mtd: Giving out device 0 to Boot Agent                                       
0x00000000-0x00200000 : "S3C2410 flash partition 1"                                                 
<5>0x00000000-0x00200000 : "S3C2410 flash partition 1"                                                     
mtd: Giving out device 1 to S3C2410 flash partition 1                                                   
<6>mtd: Giving out device 1 to S3C2410 flash partition 1                                                       
0x00400000-0x00800000 : "S3C2410 flash partition 2"                                                 
<5>0x00400000-0x00800000 : "S3C2410 flash partition 2"                                                     
mtd: Giving out device 2 to S3C2410 flash partition 2                                                   
<6>mtd: Giving out device 2 to S3C2410 flash partition 2                                                       
0x00800000-0x00a00000 : "S3C2410 flash partition 3"                                                 
<5>0x00800000-0x00a00000 : "S                         
mtd: Giving out device 3 to S3C2410 flash partition 3                                                   
<6>mtd: Giving out device 3 to S3C2410 flash partition 3                                                       
0x00a00000-0x00e00000 : "S3C2410 flash partition 4"                                                 
<5>0x00a00000-0x00e00000 : "S3C2410 flash partition 4"                                                     
mtd: Giving out device 4 to S3C2410 flash partition 4                                                   
<6>mtd: Giving out device 4 to S3C2410 flash partition 4                                                       
0x00e00000-0x01800000 : "S3C2410 flash partition 5"                                                 
<5>0x00e00000-0x01800000 : "S3C2410 flash partition 5"                                                     
mtd: Giving out device 5 to S3C2410 flash partition 5                                                   
<6>mtd: Giving out device 5 to S3C2410 flash partition 5                                                       
0x01800000-0x03000000 : "S3C2410 flash partition 6"                                                 
<5>0x01800000-0x03000000 : "S3C2410 flash partition 6"                                                     
mtd: Giving out device 6 to S3C2410 flash partition 6                                                   
<6>mtd: Giving out device 6 to S3C2410 flash partition 6                                                       
0x03000000-0x04000000 : "S3C2410 flash partition 7"                                                 
<5>0x03000000-0x04000000 : "S3C2410 flash partition 7"                                                     
mtd: Giving out device 7 to S3C2410 flash partition 7                                                   
<6>mtd: Giving out device 7 to S3C2410 flash partition 7                                                       
<7>initialised ok               
usbmon: debugfs is not available                               
<5>usbmon: debugfs is not available                                 
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI                                     
<6>s3c2410-ohci s3c2410-ohci: S3C24XX OHCI                                         
s3c2410-oh<i s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                       
6>s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                         
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000                                                   
<6>s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000                                                     
usb usb1: configuration #1 chosen from 1 choice                                             
<6>usb usb1: configuration #1 chosen from 1 choice                                                 
hub 1-0:1.0: USB hub found                         
<6>hub 1-0:1.0: USB hub found                           
hub 1-0:1.0: 2 ports detected                           
<6>hub 1-0:1.0: 2 ports detected                               
mice: PS/2 mouse device common for all mice                                         
<6>mice: PS/2 mouse device common for all mice                                             
s3c2440-i2c s3c2440-i2c: slave address 0x10                                         
<6>s3c2440-i2c s3c2440-i2c: slave address 0x10                                             
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz                                                   
<6>s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz                                                     
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter                                             
<6>s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter                             
TCP bic registered
<6>TCP bic registered
NET: Registered protocol family 1
<6>NET: Registered protocol family 1
end_request: I/O error, dev mtdblock2, sector 2
end_request: I/O error, dev mtdblock2, sector 2
EXT3-fs: unable to read superblock
<3>EXT3-fs: unable to read superblock
end_request: I/O error, dev mtdblock2, sector 2
end_request: I/O error, dev mtdblock2, sector 2
EXT2-fs: unable to read superblock
EXT2-fs: unable to read superblock
end_request: I/O error, dev mtdblock2, sector 0
end_request: I/O error, dev mtdblock2, sector 0
FAT: unable to read boot sector
<3>FAT: unable to read boot sector
VVS: Cannot open root device "mtdblock2" or unknown-block(31,2)
FS: Cannot open root device "mtdblock2" or unknown-block(31,2)
Please append a correct "root=" boot option
Please append a correct "root=" boot option
Kernel panic - no< syncing: VFS: Unable to mount root fs on unknown-block(31,2)
0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2
)
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
46楼  发表于: 2008-04-10 12:55
不要对着log发呆,试着从log里找出问题所在,如果log给出的信息不够多,打开或加入更多的debug message
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."
级别: 侠客
UID: 172
精华: 1
发帖: 48
金钱: 500 两
威望: 68 点
贡献值: 10 点
综合积分: 116 分
注册时间: 2008-02-27
最后登录: 2017-09-13
47楼  发表于: 2008-04-10 13:16
这个比较详细

##### FriendlyARM BIOS for 2440 #####                                   
[x] bon part 0 320k 2368k                       
[v] Download vivi               
[k] Download linux kernel                       
[y] Download root_yaffs image                           
[c] Download root_cramfs image                             
[n] Download Nboot                 
[e] Download Eboot                 
Download WinCE NK.nb0                       
[w] Download WinCE NK.bin                       
[d] Download & Run                 
[f] Format the nand flash                       
[p] Partition for Linux                     
Boot the system                 
[s] Set the boot parameters                         
[t] Print the TOC struct of wince                               
[q] Goto shell of vivi                     
Enter your selection: k                     
USB host is not connected yet.                             
USB host is connected. Waiting a                               

Now, Downloading [ADDRESS:30000000h,TOTAL:1404822]                                                 
RECEIVED FILE SIZE: 1404822 (1371KB/S, 1S)                                         
Downloaded file at 0x30000000, size = 1404812 bytes                                                 
Found block size = 0x00158000                           
Erasing...    ... done                     
Writing...    ... done                     
Written 1404812 bytes                   

##### FriendlyARM BIOS for 2440 #####                                   
[x] bon part 0 320k 2368k                       
[v] Download vivi               
[k] Download linux kernel                       
[y] Download root_yaffs image                           
[c] Download root_cramfs image                             
[n] Download Nboot                 
[e] Download Eboot                 
Download WinCE NK.nb0                       
[w] Download WinCE NK.bin                       
[d] Download & Ru             
[f] Format the nand flash                       
[p] Partition for Linux                     
Boot the system                 
[s] Set the boot parameters                         
[t] Print the TOC struct of wince                               
[q] Goto shell of vivi                     
Enter your selection: b                     
Copy linux kernel from 0x00050000 to 0x30008000, size = 0x00200000 ... done                                                                         
zImage magic = 0x016f2818                       
Setup linux parameters at 0x30000100                                   
linux command line is: "noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA                                                                               
C0" 
MACH_TYPE = 362             
NOW, Booting Linux......                       
Uncompressing Linux........................................................                                                                         
.............................. done, booting the kernel.                                                       
<5>Linux version 2.6.18 (root@localhost.localdomain) (gcc version 3.4.1) #11 Thu                                                                               
Apr 10 13:04:55 CST 2008                       
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177                                                       
Machine: SMDK2440               
<7>Converting old-style param struct to taglist                                             
<4>ATAG_INITRD is deprecated; please update your bootloader.                                                           
Memory policy: ECC disabled, Data cache writeback                                               
<7>On node 0 totalpages: 16384                             
<7>  DMA zone: 16384 pages, LIFO batch:3                                       
CPU S3C2440A (id 0x32440001)                           
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz                                                                   
<6>S3C24XX Clocks, (c) 2004 Simtec Electronics                                             
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on                                                   
CPU0: D VIVT write-back cache                           
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
Built 1 zonelists.  Total pages: 16384                                     
<5>Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySA                                                                               
C0 
irq: clearing pending ext status 00000200                                       
irq: clearing subpending status 00000003                                       
irq: clearing subpending status 00000002                                       
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
timer tcon=00000000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57                                                                   
Console: colour dummy device 80x30                                 
<7>selected clock c0286870 (pclk) quot 26, calc 117187                                                     
Linux version 2.6.18 (root@localhost.localdomain) (gcc version 3.4.1) #11 Thu Ap                                                                               
r 10 13:04:55 CST 2008                     
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177                                                       
Machine: SMDK2440               
ATAG_INITRD is deprecated; please update your                                           
Memory policy: ECC disabled, Data cache writeback                                               
CPU S3C2440A (id 0x32440001)                           
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz                                                                   
S3C24XX Clocks, (c) 2004 Simtec Electronics                                         
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on                                                   
CPU0: D VIVT write-back cache                           
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets                                                                 
Built 1 zonelists.  Total pages: 16384                                     
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc con                                                               
irq: clearing pending ext status 00000200                                       
irq: clearing subpending status 00000003                                       
irq: clearing subpending status 00000002                                       
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
timer tcon=00000000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57                                                                   
DDentry cache hash table entries: 8192 (order: 3, 32768 bytes)                                                             
entry cache hash table entries: 8192 (order: 3, 32768 bytes)                                                           
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                                           
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                                                           
Memory:<6>Memory: 64MB 64M                       
= 64MB total           
Memory: 61872KB available (2361K code, 505K data, 108K init)                                                           
<5>Memory: 61872KB available (2361K code, 505K data, 108K init)                                                             
<7>Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)                                                       
Mount-cache hash table entries: 512                                 
Mount-cache hash table entries: 512                                 
CPU: Testing write buffer coherency: <6>CPU: Testing write buffer coherency: ok                                                                             
ok 
NET: Registered protocol family 16                                 
<6>NET: Registered protocol family 16                                   
S3C2410 Power Management, (c) 2004 Simtec Electronics                                                   
S3C2410 Power Management, (c) 2004 Simt                                   
S3C2440: Initialising architecture                                 
S3C2440: Initialising architecture                                 
S3C2440: IRQ Support                   
S3C2440: IRQ Support                   
S3C2440: Clock Support, DVS off                             
S3C2440: Clock Support, DVS off                             
usbcore: registered new driver usbfs                                   
<6>usbcore: registered new driver usbfs                                     
usbcore: registered new driver hub                                 
<6>usbcore: registered new driver hub                                   
NET: Registered protocol family 2                               
<6>NET: Registered protocol family 2                                   
IP route cache hash table entries: 512 (order: -1, 2048 bytes)                                                             
IP route cache hash table entries: 512 (order: -1, 2048 byt                                                       
TTP established hash table entries: 2048 (order: 1, 8192 bytes)                                                             
CP established hash table entries: 2048 (order: 1, 8192 bytes)                                                             
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                                                       
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                                                       
TCP: Hash tables configured (established 2048 bind 1024)                                                       
<6>TCP: Hash tables configured (established 2048 bind 1024)                                                         
TCP reno registered                 
<6>TCP reno registered                     
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics                                                   
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics                                                   
DMA channel 0 at c4800000, irq 33                               
DMA channel 0 at c4800000, irq 33                               
DMA channel 1 at c4800040, irq 34                               
DMA channel 1 at c4800040, irq 34                               
DMA channel 2 at c4800080, irq 35                               
DMA channel 2 at c4800080, irq 35                               
DMA channel 3 at c48000c0, irq 36                               
DMA channel 3 at c48000c0, irq 36                               
NetWinder Floating Point Emulator V0.97 (double precision)                                                         
<4>NetWinder Floating Point Emulator V0.97 (double precision)                                                           
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB                                                       
<6>JFFS version 1.0, (C) 1999, 2000  Axis Communications AB                                                         
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                                   
<6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                                       
io scheduler noop registered<6>io scheduler noop registered                                                         

io scheduler anticipatory registered<6>io scheduler anticipatory registered (def                                                                               
ault) (default)             

io scheduler deadline registered<6>io scheduler deadline registered                                                                 

io scheduler cfq registered<6>io scheduler cfq registered                                                       

Console: switching to colour frame buffer device 30x40                                                     
Console: switching to colour frame buffer device 30x40                                                     
fb0: s3c2410fb frame buffer device                                 
<6>fb0: s3c2410fb frame buffer device                                   
lp: driver loaded but no devices found                                     
<6>lp: driver loaded but no devices found                                       
S3C2410 RTC, (c) 2004 Simtec Electronics                                       
S3C2410 RTC, (c) 2004 Simtec Electronics                                       
ppdev: user-space parallel port driver                                     
<6>ppdev: user-space parallel port driver                                       
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics                                                 
<6>S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics                                                     
Serial: 82<0/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled                                                                       
6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled                                                                         
s3c2440-uart<0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440                                                                         
6>s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440                                                                           
s3c2440-uart<1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440                                                                         
6>s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440                                                                           
s3c2440-uart<2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440                                                                         
6>s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 7                                                           
RAMDISKRdriver initialized: 16 RAM disks of 4096K size 1024 blocksize                                                                   
AMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize                                                                   
loop: loaded (max 8 devices)                           
<6>loop: loaded (max 8 devices)                             
dm9000 Ethernet Driver                     
<6>dm9000 Ethernet Driver                       
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2                                                       
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2                                                         
ide: Assuming<50MHz system bus speed for PIO modes; override with idebus=xx                                                                         
6>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=                                                                       
S3C24XX NAND Driver, (c) 2004 Simtec Electronics                                               
S3C24XX NAND Driver, (c) 2004 Simtec Electronics                                               
<7>s3c2410_nand_probe(c0279324)                             
<7>s3c2440-nand s3c2440-nand: mapped registers at c4c00000                                                         
<7>result 3 from 101250, 20                         
<7>result 7 from 101250, 60                         
<7>result 3 from 101250, 20                         
s3c2440<nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns                                                                   
6>s3c2440-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns                                                                     
<7>s3c2440-nand s3c2440-nand: NF_CONF is 0x2620                                             
<7>initialising set 0 (c3d36000, info c3c163e0)                                             
NAND device: Manufa<turer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit                                                                               
)
6>NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-b                                                                               
it) 
NAND<ECC_NONE selected by board driver. This is not recommended !!                                                                 
4>NAND_ECC_NONE selected by board driver. This is not recommended !!                                                                   
Scanning device for bad blocks                             
<6>Scanning device for bad blocks                               
Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit":                                                   
<5>Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit":                                                       
0x00000000-0x00004000 : "Boot Agent"                                   
<5>0x00000000-0x00004000 : "Boot Agent"                                     
mtd: Giving out device 0 to Boot Agent                                     
<6>mtd: Giving out device 0 to Boot Agent                                       
0x00000000-0x00200000 : "S3C2410 flash partition 1"                                                 
<5>0x00000000-0x00200000 : "S3C2410 flash partition 1"                                                     
mtd: Giving out device 1 to S3C2410 flash partition 1                                                   
<6>mtd: Giving out device 1 to S3C2410 flash partition 1                                                       
0x00400000-0x00800000 : "S3C2410 flash partition 2"                                                 
<5>0x00400000-0x00800000 : "S3C2410 flash partition 2"                                                     
mtd: Giving out device 2 to S3C2410 flash partition 2                                                   
<6>mtd: Giving out device 2 to S3C2410 flash partition 2                                                       
0x00800000-0x00a00000 : "S3C2410 flash partition 3"                                                 
<5>0x00800000-0x00a00000 : "S3C2410 flash partition 3"                                                     
mtd: Giving out device 3 to S3C2410 flash partition 3                                                   
<6>mtd: Giving out device 3 to S3C2410 flash partition 3                                                       
0x00a00000-0x00e00000 : "S3C2410 flash partition 4"                                                 
<5>0x00a00000-0x00e00000 : "S3C2410 flash partition 4"                                                     
mtd: Giving out device 4 to S3C2410 flash partition 4                                                   
<6>mtd: Giving out device 4 to S3C2410 flash partition 4                                                       
0x00e00000-0x01800000 : "S3C2410 flash partition 5"                                                 
<5>0x00e00000-0x01800000 : "S3C2410 flash partition 5"                                                     
mtd: Giving out device 5 to S3C2410 flash partition 5                                                   
<6>mtd: Giving out device 5 to S3C2410 flash partition 5                                                       
0x01800000-0x03000000 : "S3C2410 flash partition 6"                                                 
<5>0x01800000-0x03000000 : "S3C2410 flash partition 6"                                                     
mtd: Giving out device 6 to S3C2410 flash partition 6                                                   
<6>mtd: Giving out device 6 to S3C2410 flash partition 6                                                       
0x03000000-0x04000000 : "S3C2410 flash partition 7"                                                 
<5>0x03000000-0x04000000 : "S                         
mtd: Giving out device 7 to S3C2410 flash partition 7                                                   
<6>mtd: Giving out device 7 to S3C2410 flash partition 7                                                       
<7>initialised ok               
usbmon: debugfs is not available                               
<5>usbmon: debugfs is not available                                 
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI                                     
<6>s3c2410-ohci s3c2410-ohci: S3C24XX OHCI                                         
s3c2410-oh<i s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                       
6>s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1                                                                         
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000                                                   
<6>s3c2410-ohci s3c2410-ohci: irq 4                                 
usb usb1: configuration #1 chosen from 1 choice                                             
<6>usb usb1: configuration #1 chosen from 1 choice                                                 
hub 1-0:1.0: USB hub found                         
<6>hub 1-0:1.0: USB hub found                           
hub 1-0:1.0: 2 ports detected                           
<6>hub 1-0:1.0: 2 ports detected                               
mice: PS/2 mouse device common for all mice                                         
<6>mice: PS/2 mouse device common for all mice                                             
s3c2440-i2c s3c2440-i2c: slave address 0x10                                         
<6>s3c2440-i2c s3c2440-i2c: slave address 0x10                                             
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz                                                   
<6>s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz                       
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
<6>s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
TCP bic registered
<6>TCP bic registered
NET: Registered protocol family 1
<6>NET: Registered protocol family 1
jffs_scan_flash()< Did not find even a single chunk of free space. This is BAD!
4>jffs_scan_flash(): Did not find even a single chunk of free space. This is BAD
!
jffs_scan_falsh():Free size accounting screwed
<4>jffs_scan_falsh():Free size accounting screwed
jfffs_scan_flash():free_chunk_siz<1 == 0x400000, free_chunk_size2 == 0x0, fmc->f
ree_size == 0x0
4>jfffs_scan_flash():free_chunk_size1 == 0x400000, free_chunk_size2 == 0x0, fmc-
>free_size == 0x0
JFFS: Failed to mount device mtdblock2.
<4>JFFS: Failed to mount device mtdblock2.
No filesystem could mount root, tried: No filesystem could mount root, tried:  e
xt3 ext3 ext2 ext2 msdos msdos vfat vfat jffs jffs romfs romfs

Kernel panic - no< syncing: VFS: Unable to mount root fs on unknown-block(31,2)
0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2
)
*無鈳取玳
级别: 论坛版主
UID: 27
精华: 12
发帖: 5398
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11036 分
注册时间: 2008-01-16
最后登录: 2014-11-22
48楼  发表于: 2008-04-10 14:17
不要放走任何一个细节,为什么现在有新的log
NAND<ECC_NONE selected by board driver. This is not recommended !! 
而旧的出错信息
end_request: I/O error, dev mtdblock2, sector 2
没有了?
"If you have an apple and I have an apple and we exchange apples, then you and I will
still each have one apple. But if you have an idea and I have an idea and we exchange
these ideas, then each of us will have two ideas."
级别: 侠客
UID: 172
精华: 1
发帖: 48
金钱: 500 两
威望: 68 点
贡献值: 10 点
综合积分: 116 分
注册时间: 2008-02-27
最后登录: 2017-09-13
49楼  发表于: 2008-04-10 15:18
NAND_ECC_NONE 为什么变成了NAND<ECC_NONE 了 ?