Tiny6410在用友善提供的的ubi文件安装后正常启动，其中打印信息如下：
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1032192 bytes
UBI: smallest flash I/O unit:    8192
UBI: VID header offset:          8192 (aligned 8192)
UBI: data offset:                16384
UBI: max. sequence number:       8
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "File System"
UBI: MTD device size:            2036 MiB
UBI: number of good PEBs:        2033
UBI: number of bad PEBs:         3
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 2033
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 2/0
UBI: image sequence number:  829149979
UBI: background thread "ubi_bgt0d" started, PID 918

我自己用命令制作的文件系统启动不起来，命令为：
mkfs.ubifs -r /home/James/arm/rootfs/ -m 8192 -e 1048576 -c 800 -o ubifs.img
ubinize -o ubi.img -m 8192 -p 1024KiB -s 8192 /home/James/arm/ubinize.cfg
ubinize.cfg:
[ubifs]
mode=ubi
image=ubifs.img
vol_id=0
vol_size=100MiB
vol_type=dynamic
vol_alignment=1
vol_name=rootfs
vol_flags=autoresize

打印信息如下，这个“UBI: max. sequence number:       0”选项怎么在制作的时候改变？或者里面出了什么错误？

UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   1048576 bytes (1024 KiB)
UBI: logical eraseblock size:    1032192 bytes
UBI: smallest flash I/O unit:    8192
UBI: VID header offset:          8192 (aligned 8192)
UBI: data offset:                16384

UBI warning: process_eb: valid VID header but corrupted EC header at PEB 0
UBI warning: process_eb: valid VID header but corrupted EC header at PEB 1
UBI warning: process_eb: valid VID header but corrupted EC header at PEB 2
UBI error: check_corruption: PEB 14 contains corrupted VID header, and the data does not contain all 0xFF, this may be a non-UBI PEB or a severe VID header corruption which requires manual inspection
UBI error: check_what_we_have: 1 PEBs are corrupted and preserved
Corrupted PEBs are: 14


UBI: max. sequence number:       0
UBI: volume 0 ("rootfs") re-sized from 102 to 2008 LEBs
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "File System"
UBI: MTD device size:            2036 MiB
UBI: number of good PEBs:        2033
UBI: number of bad PEBs:         3
UBI: number of corrupted PEBs:   1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 2032
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 1/0
UBI: image sequence number:  950132328
UBI: background thread "ubi_bgt0d" started, PID 918

另外烧录的地址有特别限制吗？

必须使用我们提供的mkubimage

那，
1，找了N久也没找到相关下载，光盘里面也没有
2.这个程序替换的是这两步中的哪一步？
mkfs.ubifs -r /home/James/arm/rootfs/ -m 8192 -e 1048576 -c 800 -o ubifs.img
ubinize -o ubi.img -m 8192 -p 1024KiB -s 8192 /home/James/arm/ubinize.cfg
3，这个程序的参数说明？跟 mkfs.ubifs一样吗？
谢谢

hello，能给个你们提供的mkubimage给到我吗？