我有一块2410的板子请看附图，我想了解这块板子是谁做的，这板子带有sim芯片验证功能。主要芯片 s3c2410al-20 hy57v561620ftp nand512w3a2bn6 sp3223eey wd66c162p(SLE66C162P) cs8900a 等
加电后无操作及有操作超级终端如下显示
0000B4
F->M
OK
VRFY
OK
STKP
33ECDF74
U-Boot 1.1.4 (Apr 25 2007 - 17:33:11)
U-Boot code: 31F00000 -> 31F18BA4 BSS: -> 31F1DCBC
IRQ Stack: 31ecff7c
FIQ Stack: 31ecef7c
RAM Configuration:
Bank #0: 30000000 32 MB
NAND: 64 MB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
## Booting image at 00030000 ...
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done
Warning: this binary is not compressed linux kernel image
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0
"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux................................................... done, boo
ting the kernel.
Linux version 2.4.18-rmk7-pxa1 (root@linuxarm) (gcc version 2.95.3 20010315 (rel
ease)) #775 一 10月 24 19:05:27 CST 2005
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0
DEBUG: timer count 15626
Calibrating delay loop... 99.94 BogoMIPS
Memory: 32MB = 32MB total
Memory: 30500KB available (1368K code, 298K data, 48K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
pty: 256 Unix98 ptys configured
S3C2410 Real Time Clock Driver v0.1
block: 64 slots per queue, batch=16
Test Uniform Multi-Platform E-IDE driver Revision: 6.31
ide_init
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
init_ide_data
IDE INIT
ideprove_int
select all=160
reg=-738197460select all=160
reg=-738197460select all=176
reg=-738197460select all=176
reg=-738197460<6>eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300
cs89x0 media RJ-45, IRQ 37
windfy: s3c2410_nand_init
NAND device: Manufacture ID: 0x20, Chip ID: 0x76 (Unknown NAND 64MB 3,3V)
Creating 4 MTD partitions on "NAND 64MB 3,3V":
0x00000000-0x00030000 : "Bootloader"
0x00030000-0x00100000 : "kernel"
0x00100000-0x01e00000 : "root"
0x01f00000-0x02000000 : "userFS"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 48K
mount /etc as ramfs
re-create the /etc/mtab entries
Fri Jun 13 16:30:00 UTC 2003
yaffs: dev is 7939 name is "1f:03"
Using /usr/local/userleds.o
windfy: usrer led init
Using /usr/local/at2401.o
init at2401 device
Thanks for your using at2401 device
IPADDR is Error
rmmod: iccard: No such file or directory
Using iccard.o
iccard Ver: WATCH FKB 3.7A16 21001
Driver Version [WATCH FKB 3.7A16 21001]: AppVersion [09.06.30.000]
bGreen lff
bYello off
bRed off
ed close
bRed on
led close
Program is runing!
启动后按空格键
SMDK2410 #
SMDK2410 # ？
SMDK2410 # help
? - alias for 'help'
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
date - get/set/reset date & time
dcache - enable or disable data cache
echo - echo args to console
go - start application at address 'addr'
help - print online help
icache - enable or disable instruction cache
iminfo - print header information for application image
irqinfo - print information about IRQs
loadb - load binary file over serial line (kermit /xmodem mode)
loads - load S-Record file over serial line
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nand - NAND sub-system
nboot - boot from NAND device
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
tftpboot- boot image via network using TFTP protocol
version - print monitor version
ctrl+c
~ #
~ # ls
bin etc linuxrc proc tmp var
dev lib mnt sbin usr
[ 此帖被libinh9635在2012-12-22 22:52重新编辑 ]
