關於只要新增中文語系的問題請益

各位先進您好, 我遇到一個問題是 無論我中間有無新增驅動

或者最原始的狀況下僅新增 中文語系就會出下限面的錯誤訊息

請問有方法解決嗎

感謝 :D

Writing C:\WINCE500\PBWorkspaces\mini2440\RelDir\mini2440_ARMV4I_Release\NK.bin
Table of contents  826663a8  00002d50  (     11600)
Writing ROM signature and TOC pointer at 80200040
Kernel data copy section  80d6bc08  00000010  (        16)
ROM Header                82666354  00000054  (        84)
First DLL code Address:  02630000
Last DLL code Address:   04000000
First DLL Address:       01e101e4
Last DLL Address:        02000000
Physical Start Address:  80200000
Physical End Address:    826690f8
Start RAM:               82000000
Start of free RAM:       82029000
End of RAM:              83e00000
Number of Modules:       212
Number of Copy Sections: 1
Copy Section Offset:     80d6bc08
FileSys 4K Chunks/Mbyte: 64 <2Mbyte  64 2-4Mbyte  0 4-6Mbyte  0 >6Mbyte
CPU Type:                    01c2h
Miscellaneous Flags:         0002h
Extensions Pointer:      80202440
Total ROM size:          024690f8 (  38179064)
Error: Ram start overlaps rom binary
Rom end  : 0x826690f8
Ram start: 0x82029000
NK
physfirst 80200000
physlast  826690f8
ulRAMFree 82029000
Fatal error hit, exiting...
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).
磁碟區 C 中的磁碟是 System
磁碟區序號:  DCF2-4D4F
C:\WINCE500\PBWorkspaces\mini2440\RelDir\mini2440_ARMV4I_Release 的目錄
2009/11/10  上午 11:08        37,731,115 NK.bin
               1 個檔案      37,731,115 位元組
               0 個目錄  30,665,039,872 位元組可用
BLDDEMO: mini2440 build complete.

mini2440 - 3 error(s), 28 warning(s)

字库太大了，添加的组件太多了，需要去掉一些，特别是那个花哨的TCPMP播放器(需要手工编辑platform.bib去掉相关copy)

嗯嗯   因為我有嘗試過一開始只改變語系 就無法編輯過去了

Writing C:\WINCE500\PBWorkspaces\mini2440\RelDir\mini2440_ARMV4I_Release\NK.bin
Table of contents  82376d04  00002928  (     10536)
Writing ROM signature and TOC pointer at 80200040
Kernel data copy section  809a8e24  00000010  (        16)
ROM Header                82376cb0  00000054  (        84)
First DLL code Address:  02630000
Last DLL code Address:   04000000
First DLL Address:       01e101e4
Last DLL Address:        02000000
Physical Start Address:  80200000
Physical End Address:    8237962c
Start RAM:               82000000
Start of free RAM:       82029000
End of RAM:              83e00000
Number of Modules:       212
Number of Copy Sections: 1
Copy Section Offset:     809a8e24
FileSys 4K Chunks/Mbyte: 64 <2Mbyte  64 2-4Mbyte  0 4-6Mbyte  0 >6Mbyte
CPU Type:                    01c2h
Miscellaneous Flags:         0002h
Extensions Pointer:      80202440
Total ROM size:          0217962c (  35100204)
Error: Ram start overlaps rom binary
Rom end  : 0x8237962c
Ram start: 0x82029000
NK
physfirst 80200000
physlast  8237962c
ulRAMFree 82029000
Fatal error hit, exiting...
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).
makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec).
磁碟區 C 中的磁碟是 System
磁碟區序號:  DCF2-4D4F
C:\WINCE500\PBWorkspaces\mini2440\RelDir\mini2440_ARMV4I_Release 的目錄
2009/11/11  上午 11:29        34,650,731 NK.bin
               1 個檔案      34,650,731 位元組
               0 個目錄  30,667,509,760 位元組可用
BLDDEMO: mini2440 build complete.

mini2440 - 3 error(s), 28 warning(s)


這是 剛剛有根據大大的建議 把platform.bib去掉相关TCPMP播放器 copy
然後僅更換語系無加入其他組件

結果還是不行哩    

依然太大，再去掉SQL, IE试试

是唷  我試試看  .　　　感謝　：Ｄ


不過　我沒有增加　ＳＱＬ　說　　我刪掉其他的試試看