为什我按如下操作
首先我申明我的superboot-20100624.bin烧写和运行都正常
Step1: 把SD卡插入电脑,双击打开”images\FriendlyARM.ini”文件
Step2: 找到”OS=CE6”,并改为”OS=Android”,保存修改,取出SD卡插到开发板上。
Step3: 上电开机,同样的“滴”一声开始,同样的“滴滴”两声结束,更新完毕,整个过程不到1分钟。
Step4: 把开发板S2开关设置为”NAND”启动,这时重启系统就可以看到Android已经被安装好了。
结果总是在串口中出现如下东东触摸屏也没亮,
##### FriendlyARM Superboot for 6410 #####
[f] Format the nand flash
[v] Download uboot.bin
[k] Download Linux/Android kernel
[y] Download root yaffs2 image
Download root ubifs image
[a] Download Absolute User Application
[n] Download Nboot.nb0 for WinCE
[l] Download WinCE bootlogo
[w] Download WinCE NK.bin
Boot the system
[s] Set the boot parameter of Linux
Version: 1022
Enter your Selection:
有哪位遇到过类似情况的或高人指点一下