大神，我的也是一直在logo页面进不去，但是好像没找到类似设置的地方，帮忙掌掌眼
ÿHELLO! BOOT0 is starting!
boot0 version : 4.0.0
rtc[1] value = 0x00010000
rtc[2] value = 0x00020000
rtc[3] value = 0x0003000f
DRAM DRIVE INFO: V1.0
DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM normal_mode value: 00000001
DRAM CLK =672 MHZ
PMU: AXP81X
ddr voltage = 1500 mv
using ic H8
using axp AXP818
DRAM zq value: 00005bbb
dram size =1024
card boot number = 2
card no is 2
sdcard 2 line count 0
[mmc]: mmc driver ver 2014-8-11 15:06:39
[mmc]: ***Try SD card 2***
[mmc]: mmc 2 cmd 8 timeout, err 00000100
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 timeout, err 00000100
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ***Try MMC card 2***
[mmc]: MMC ver 5.0
[mmc]: SD/MMC Card: 4bit, capacity: 7456MB
[mmc]: vendor: Man 00150100 Snr 007670e2
[mmc]: product: 8WPD3
[mmc]: revision: 5.2
[mmc]: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 000dc000.
sum=cc097928
src_sum=cc097928
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.335]
U-Boot 2011.09-rc1-dirty (Oct 31 2014 - 20:36:29) Allwinner Technology
[ 0.343]version: 2.1.0
normal mode
[ 0.420]pmbus: normal or secure os
ready
not set main pmu id
[ 0.428]PMU: AXP81X
[ 0.430]PMU: AXP81X found
bat_vol=0, ratio=100
[ 0.435]PMU: dcdc2 900
[ 0.438]PMU: pll1 1008 Mhz
AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
set power on vol to default
dcdc1_vol = 3000, onoff=1
dcdc2_vol = 900, onoff=1
dcdc3_vol = 900, onoff=1
dcdc4_vol = 900, onoff=1
dcdc5_vol = 1500, onoff=1
dcdc6_vol = 900, onoff=1
aldo1_vol = 1800, onoff=1
aldo2_vol = 1800, onoff=1
aldo3_vol = 3000, onoff=1
fldo2_vol = 900, onoff=1
dldo1_vol = 3300, onoff=0
find power_sply to end
supply=dcdc1
axp=axp81x, supply=dcdc1, vol=3000
reg addr=0x1c20b04, value=0xa, pmu_vol=3000
supply=dcdc1
axp=axp81x, supply=dcdc1, vol=3000
reg addr=0x1c20b08, value=0xa, pmu_vol=3000
supply=dldo4
axp=axp81x, supply=dldo4, vol=3000
reg addr=0x1c20b0c, value=0xa, pmu_vol=3000
supply=dcdc1
axp=axp81x, supply=dcdc1, vol=3000
reg addr=0x1c20b10, value=0xa, pmu_vol=3000
supply=dcdc1
axp=axp81x, supply=dcdc1, vol=3000
reg addr=0x1c20b14, value=0xa, pmu_vol=3000
supply=dcdc1
axp=axp81x, supply=dcdc1, vol=3000
reg addr=0x1c20b18, value=0xa, pmu_vol=3000
supply=dcdc1
axp=axp81x, supply=dcdc1, vol=3000
reg addr=0x1c20b1c, value=0xa, pmu_vol=3000
supply=aldo3
axp=axp81x, supply=aldo3, vol=3000
reg addr=0x1f02f00, value=0xa, pmu_vol=3000
config gpio bias voltage finish
vbus exist
no battery, limit to dc
ac100 reg 0x00 = 0x101
ac100 reg 0xd0 = 0x0
ac100 reg 0xd1 = 0x0
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.652]DRAM: 1 GiB
relocation Offset is: 35b00000
[box standby] read rtc = 0xf
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 2
[ 0.880][mmc]: mmc driver ver 2014-10-10 13:22:35
[ 0.885][mmc]: get sdc_2xmode fail used = 0
[ 0.890][mmc]: get sdc_ddrmode fail used = 0
[ 0.894][mmc]: get sdc_f_max fail,use default sdc_f_max 48000000
[ 0.900][mmc]: get card_line ok, card_line = 4
[ 0.905][mmc]: get sdc_ex_dly_used fail,use default dly
[ 0.910][mmc]: SUNXI SD/MMC: 2
[ 0.924][mmc]: ************Try SD card 2************
[ 0.929][mmc]: mmc 2 cmd 8 timeout, err 100
[ 0.934][mmc]: smc 2 err, cmd 8, RTO
[ 0.939][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[ 0.943][mmc]: mmc send if cond failed
[ 0.947][mmc]: mmc 2 cmd 55 timeout, err 100
[ 0.951][mmc]: smc 2 err, cmd 55, RTO
[ 0.957][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[ 0.961][mmc]: send app cmd failed
[ 0.964][mmc]: ************Try MMC card 2************
[ 1.009][mmc]: MID 000015 PSN 7670e268
[ 1.012][mmc]: PNM 8WPD3R -- 0x38-57-50-44-33-52
[ 1.017][mmc]: PRV 0.0
[ 1.020][mmc]: MDT m-4 y-2017
[ 1.023][mmc]: MMC ver 5.0
[ 1.026][mmc]: ---------------mmc->clock 46153846-----------
[ 1.031][mmc]: ---------------mmc->bus_width 4--------------
[ 1.037][mmc]: SD/MMC Card: 4bit, capacity: 7456MB
[ 1.042][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[ 1.048][mmc]: ************SD/MMC 2 init OK!!!************
[ 1.054]sunxi flash init ok
script config pll_de to 504 Mhz
script config pll_video1 to 297 Mhz
enable power vcc-hdmi-18, ret=0
[TV]gm7121_module_init begin
[TV] tv_power: vcc-cvbs-33
DRV_DISP_Init end
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 2
error: open config.fex, maybe it is not exist
attched ok, mgr1<-->device0, type=2, mode=11----
ready to set mode
gm7121_tv_set_mode, mode=11
gm7121_tv_open
gm7121_tv_get_video_timing_info, x,y=720,576
pclk=27000000, cur=0
enable power vcc-cvbs-33, ret=0
gm7121_tv_open finish
[ 2.823]finally, output_type=0x2, output_mode=0xb, screen_id=0x1, disp_para=0x20b0000
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:13-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 30000000
misc : 34000000 1000000
recovery : 35000000 2000000
sysrecovery : 37000000 30000000
private : 67000000 1000000
Reserve0 : 68000000 1000000
Reserve1 : 69000000 2000000
Reserve2 : 6b000000 1000000
cache : 6c000000 28000000
UDISK : 94000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
misc_message->command = ff
to be run cmd=run setargs_mmc boot_normal
the user data'magic is bad
mount part name bootloader
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 3686456
[ 3.137]screen_id =1, screen_width =720, screen_height =576
[ 3.143]frame buffer address 46400000
[ 3.147]Hit any key to stop autoboot: 0
read boot or recovery all
[ 3.862]sunxi flash read :offset 3000000, 15785684 bytes OK
[ 3.872]ready to boot
board_display_setenv: disp_para=20b0000
[ 3.878][mmc]: mmc exit start
[ 3.897][mmc]: mmc 2 cmd 8 timeout, err 100
[ 3.902][mmc]: smc 2 err, cmd 8, RTO
[ 3.907][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[ 3.911][mmc]: mmc send if cond failed
[ 3.915][mmc]: mmc 2 cmd 55 timeout, err 100
[ 3.919][mmc]: smc 2 err, cmd 55, RTO
[ 3.925][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[ 3.929][mmc]: send app cmd failed
[ 3.940][mmc]: mmc 2 exit ok
[ 3.943]
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 1024MB
------sun8i_smp_init_ops----37-----
[ 0.250090] CPU4: failed to boot: -22
[ 0.290080] CPU5: failed to boot: -22
[ 0.330062] CPU6: failed to boot: -22
[ 0.370069] CPU7: failed to boot: -22
<[ 0.761356] config_dynamic_standby: script_parser_fetch err.
[ 0.761774] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
[ 0.761931] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
[ 0.761954] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
[ 1.002461] [cpu_freq] ERR: Can not get cluster0_power from sys_config, use default[vdd-cpua] for cluster0
[ 1.013212] [cpu_freq] ERR: Can not get cluster0_power from sys_config, use default[vdd-cpub] for cluster1
[ 1.079855] init: property_opt_for_mem: start!
[ 1.084924] init: property_opt_for_mem: ro.sf.lcd_density not set, disable adaptive memory function!
[ 1.209128] init: /dev/hw_random not found
[ 1.401721] init: /dev/hw_random not found
[ 1.600990] fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/by-name/system at /system options: (null) error: Invalid argument
[ 1.616636] EXT4-fs (mmcblk0p15): VFS: Can't find ext4 filesystem
[ 1.760134] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p15
[ 1.768595] EXT4-fs (mmcblk0p15): VFS: Can't find ext4 filesystem
[ 1.880893] fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/by-name/cache at /cache options: nomblk_io_submit,barrier=1 error: Invalid argument
[ 21.008571] fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/by-name/alog at /logger options: nomblk_io_submit,barrier=1 error: No such file or directory
[ 21.026801] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
[ 21.190109] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p1
[ 21.198503] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
[ 21.320872] fs_mgr: fs_mgr_mount_all(): /dev/block/by-name/UDISK is wiped and /data ext4 is encryptable. Suggest recovery...
[ 21.333498] init: fs_mgr_mount_all returned an error
[ 21.339295] fs_mgr: finish format to ext4: /dev/block/mmcblk0p1
[ 21.345791] fs_mgr: exec: pid 139 exited with return code 255: Unknown error 65280
[ 24.354285] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p1
[ 24.362859] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
[ 24.480884] fs_mgr: fs_mgr_mount_all(): /dev/block/by-name/UDISK is wiped and /data ext4 is encryptable. Suggest recovery...
[ 24.493507] init: fs_mgr_mount_all returned an error
[ 24.499256] fs_mgr: finish format to ext4: /dev/block/mmcblk0p1
[ 24.505667] fs_mgr: exec: pid 140 exited with return code 255: Unknown error 65280
[ 27.514157] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p1
[ 27.525113] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
[ 27.630920] fs_mgr: fs_mgr_mount_all(): /dev/block/by-name/UDISK is wiped and /data ext4 is encryptable. Suggest recovery...
[ 27.643543] init: fs_mgr_mount_all returned an error
[ 27.649286] fs_mgr: finish format to ext4: /dev/block/mmcblk0p1
[ 27.655697] fs_mgr: exec: pid 141 exited with return code 255: Unknown error 65280
[ 30.664186] fs_mgr: begin to format ext4 buffer : /dev/block/mmcblk0p1
[ 30.672735] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem
[ 30.800845] fs_mgr: fs_mgr_mount_all(): /dev/block/by-name/UDISK is wiped and /data ext4 is encryptable. Suggest recovery...
[ 30.813466] init: fs_mgr_mount_all returned an error
[ 30.819200] fs_mgr: finish format to ext4: /dev/block/mmcblk0p1
